How to factory reset the Xbox One: A comprehensive guide

An Xbox One reset is the process of restoring the console to its factory defaults. You’d typically perform the reset if you planned to sell or give away your Xbox One and needed to wipe all your personal data from the console. However, this is far from being the only reason for the reset. Simply clearing the Xbox cache and bugs may not always help when your console becomes sluggish and often crashes. The Xbox’s performance may suffer due to extensive usage periods or after you install new software. Giving your console a fresh start with a reset may solve its performance issues and provide a better gaming experience. Two different types of factory resets may help to solve various issues with your Xbox One: A partial factory reset will revert settings to their default state, reset the console’s operating system, settings, and accounts, and delete the files that may be impairing the Xbox’s performance. It’s important to note that a partial factory reset doesn’t delete or otherwise affect the games or data saved on the console. A full factory reset will delete all data from your Xbox, including all accounts, games, their data, and manual setting changes. A partial factory reset is a good option if you cannot manually find files that may be causing performance issues or if you’d like to reboot your Xbox’s operating system while keeping all your games installed. On the other hand, a full factory reset is the go-to option if you plan to sell or give away your console.

Once you’ve decided to reset your Xbox One to its factory defaults, you can choose from three different ways to do this: Initiate a factory reset on the console, use a USB flash drive to clear your console, or initiate a factory reset using a startup troubleshooter. Let’s take a closer look at these options.

You can return your Xbox One to factory default settings by following these steps: Press the Xbox button. Once the guide opens, select “Profile and system,” choose the “Settings” option, and tap on “Console info.” Tap on “Select console.” A window asking if you want to “Reset your console?” will open, prompting you to choose from the two options: “Reset and remove everything.” This option will return the console to its original state, wiping out all your personal information, games, apps, and customized settings. It should be your last resort when troubleshooting or if you plan to give away your Xbox. “Reset and keep my games and apps.” By choosing this option, you’ll reset Xbox’s operating system and delete all potentially harmful data without wiping out your games or apps.

If your Xbox is no longer displaying on the screen and you cannot access its settings menu, you can factory reset your console using a USB flash drive. You’ll need a PC with Windows OS and an empty USB flash drive to use this method. Although most USB flash drives come in FAT32 format, for the Xbox factory reset, you’ll need to configure it to an NTFS format. It should also have at least 4GB of storage space. First, you’ll need to mount the Xbox system update from your PC to USB. Afterward, power off your Xbox One and plug in the flash drive containing the system update. Press and hold the “Pair” and “Eject” buttons on the console for 10-15 seconds till you hear two “power-up” beeps. Release the buttons after the second “power-up” chirp and remove the USB from the console. Initiate a restart of your Xbox One. Once the console restarts, the setup guide will show on its screen. You can also find detailed instructions on how to factory reset your Xbox One on the console as well as using a USB flash drive on Xbox’s official webpage.

If your Xbox One doesn’t launch properly, you can reset it to its default settings using the console’s startup troubleshooter. Follow these steps to initiate a factory reset: Fully power off your Xbox console, remove the network and power cables, and wait for around half a minute. Reconnect the power cord back to the console. Press the “Pair” button, which is on the left side of the console, and the “Eject” button, located in the front of the console, at the same time. While holding both buttons, press the Xbox button on the front of the console. Let go of the Xbox button, but keep holding the “Eject” and “Pair” buttons for 10-15 seconds. You should hear two beeps, after which you can release the buttons. The Xbox startup troubleshooter should appear on your console’s screen. Choose “Reset this Xbox” from the troubleshooter’s settings and proceed to the factory reset. {SHORTCODES.blogRelatedArticles}

A factory reset on your Xbox One console may require a varying amount of time, depending on several factors. Below are some insights into what to expect while resetting your console time-wise.

The time it takes to factory reset the Xbox One varies depending on the amount of data stored on the console’s system and which type of reset you want to perform. If you choose to perform a partial factory reset to keep your games and apps saved, it may take anywhere from a few minutes to around 20 minutes. If you decide to reset your Xbox console fully, it may take 20 minutes to a couple of hours, depending on how much content the hard drive has.

If your Xbox gets stuck while performing a factory reset, the first thing you should do is wait. As frustrating as it sounds, sometimes the process could take longer than expected, possibly up to a few hours. If the reset processes fail to complete on their own, you could also try the hard reset on the console. To do so, press and hold the Xbox’s power button until it turns off completely. Unplug the power cord from the Xbox, wait for a few minutes, and plug it back in. Afterward, press the power button to turn the console back on.

Before you opt for a factory reset, you should take a couple of steps to ensure the reset runs smoothly. Also, keep in mind that once you complete the factory reset, all your accounts, settings, and games (depending on the reset you choose) will be deleted from your Xbox. Below are some of the measures you should take before initiating a reset: Back up important data. Make sure to save your games and their progress in your Xbox Live account. You should also consider backing up additional data, such as screenshots, clips, or game settings, to an external hard drive or a USB drive. Remove discs. Removing the disc from the Xbox ensures the disc won’t be unexpectedly accessed, ejected, or mishandled during the reset. The reset process could potentially cause an error or glitch with the disc drive, making the disc stuck in the console. Disconnect external storage devices. If you’re using an external hard drive or other storage device, disconnect it before performing the factory reset. It will help to avoid any potential issues, such as data loss, reset interruptions, or extended reset time.

A factory reset is generally safe and sometimes even necessary to resolve software glitches, improve your Xbox’s performance, or prepare the console for a new user. At the same time, you should beware that once you perform a factory reset on your Xbox, all your account details will be deleted from the console. So make sure to back up all your data in a cloud service or on an external device.

You cannot undo the Xbox’s reset and revert the console to its previous state after you perform it. The purpose of the reset is to wipe most of the data from the device and return it to its original settings. As a result, a factory reset removes all the information tied to your account, including games, apps, and settings. It’s one of the reasons why you should always back up your data in the cloud to avoid losing it.

You can get your games safely back after the factory reset as long as you have access to the accounts you used to purchase the games. You’d simply need to reinstall your games to the reset console or your new Xbox. Another way to retrieve your games is to save them onto an external hard drive before you initiate a reset or use Xbox cloud services to store your gaming data and progress.

You can choose from two options to reset your Xbox One controller: Run a power cycle over the controller or resync the controller to your Xbox. To run a controller’s power cycle, press the Xbox button on the controller till it turns off, and press the same button again to turn it back on. If the power cycle doesn’t solve the issue, you can try resyncing your controller and console by following these instructions: Turn on your console. Press the Xbox button on the controller to turn it on. Press and release the “Connect” button on the console next to its disc tray. Press and release the “Connect” button on the top of the controller. Afterward, the controller’s Xbox button will flash and remain lit once paired with the console.